Www.dresser.com Gen. Info Oct 2008-CO. SRV-1 General Information General Information (SRV-1/Q4.04) GI.1. Trained and available to provide guidance in sizing and selection of proper. Consolidated Safety Relief Valves General Information (SRV-1/Q4.04). Fully certified by Dresser as Consolidated valve assembly and repair facilities. They also meet or exceed the standards of the ASME and the National Board. Refer to capacity table on page 1700.45 for ASME Code Section I Saturated Steam. At 1000 psig set pressure, select a #3 orifice with a saturated capacity of.
Change set pressure, question
Change set pressure, question
I have a Dresser Consolidated 19000 (pressure relief valve) the model of the valve is 1-19110LCF-2-CC-MS-31-MT-FT-LA, 40 USGPM (WATER)
I saw the manual and establish the following (see image attached).
As you can see
19 is the model
110 diameter orifice decimals (0.110 in2)
L range of pressure that cover from 5 min to 290 max.
See image attached. accoring to the pressure there is a corresponding value of gpm.
I can set the valve in any range of these.
for example the valve actually set pressure is 186 psig and I want to change to 90 psig, that can be possible.
thank you for your time
I saw the manual and establish the following (see image attached).
As you can see
19 is the model
110 diameter orifice decimals (0.110 in2)
L range of pressure that cover from 5 min to 290 max.
See image attached. accoring to the pressure there is a corresponding value of gpm.
I can set the valve in any range of these.
for example the valve actually set pressure is 186 psig and I want to change to 90 psig, that can be possible.
thank you for your time
Emerson Psv Sizing Software
Change set pressure, question
Change set pressure, question
Dresser Consolidated Psv Catalog
I have a Dresser Consolidated 19000 (pressure relief valve) the model of the valve is 1-19110LCF-2-CC-MS-31-MT-FT-LA, 40 USGPM (WATER)
I saw the manual and establish the following (see image attached).
As you can see
19 is the model
110 diameter orifice decimals (0.110 in2)
L range of pressure that cover from 5 min to 290 max.
See image attached. accoring to the pressure there is a corresponding value of gpm.
I can set the valve in any range of these.
for example the valve actually set pressure is 186 psig and I want to change to 90 psig, that can be possible.
thank you for your time
I saw the manual and establish the following (see image attached).
As you can see
19 is the model
110 diameter orifice decimals (0.110 in2)
L range of pressure that cover from 5 min to 290 max.
See image attached. accoring to the pressure there is a corresponding value of gpm.
I can set the valve in any range of these.
for example the valve actually set pressure is 186 psig and I want to change to 90 psig, that can be possible.
thank you for your time